Búsqueda de Productos

    BUSQUE AHORA TODAS SUS PHASE II SOLUCIONES

    Radwell está aquí para proveer todas sus necesidades de planta.

    Radwell no es un distribuidor autorizado, revendedor o representante de los productos que aparecen en este sitio web. Todos los nombres de productos, marcas registradas, marcas y logotipos usados en este sitio son propiedad de sus respectivos propietarios. La representación, descripción o venta de productos con estos nombres, marcas registradas, marcas y logotipos tiene únicamente fines identificativos y no pretende indicar afiliación o autorización alguna por parte de ninguno de los poseedores de los derechos.

    Resultados del filtro
    50 resultados.
    PHASE II PHT-3500

    PHASE II

    PHT-3500

    200 HL TO 960 HL HARDNESS, PORTABLE ELECTRONIC HARDNESS TESTER BRINELL, ROCKWELL B, ROCKWELL C, SHORE AND VICKERS, ACCURATE UP TO 0.5% (MOQ=1, PKG QTY=1)
    $3.200,00 Tan poco como $1.920,00
    $1.920,00
    PHASE II 221-312

    PHASE II

    221-312

    12" TABLE DIAM, HORIZONTAL & VERTICAL ROTARY MACHINING TABLE 8-1/4" CENTERLINE HEIGHT, 4MT CENTER TAPER, 0.545" T-SLOT WIDTH (MOQ=1, PKG QTY=1)
    $2.236,00 Tan poco como $1.342,00
    $1.342,00
    PHASE II 225-008

    PHASE II

    225-008

    24 POSITION, 8" CHUCK, SUPER INDEXING SPACER 5.87" HIGH CENTERLINE, 2.48" CHUCK THROUGH HOLE (MOQ=1, PKG QTY=1)
    $2.156,00 Tan poco como $1.294,00
    $1.294,00
    PHASE II PHT-3300

    PHASE II

    PHT-3300

    200 HL TO 960 HL HARDNESS, PORTABLE ELECTRONIC HARDNESS TESTER LEEB, ACCURATE UP TO 0.5% (MOQ=1, PKG QTY=1)
    $2.134,00 Tan poco como $1.281,00
    $1.281,00
    PHASE II UTG-1500

    PHASE II

    UTG-1500

    0.1MM TO 200MM MEASUREMENT, 0.1MM RESOLUTION ELECTRONIC THICKNESS GAGE ACCURATE UP TO 0.1MM
    $2.038,00 Tan poco como $1.223,00
    $1.223,00
    PHASE II 225-006

    PHASE II

    225-006

    24 POSITION, 6" CHUCK, SUPER INDEXING SPACER 5-1/8" HIGH CENTERLINE, 1.73" CHUCK THROUGH HOLE (MOQ=1, PKG QTY=1)
    $1.730,00 Tan poco como $1.038,00
    $1.038,00
    PHASE II SRG-2200

    PHASE II

    SRG-2200

    SURFACE ROUGHNESS GAGES; ROUGHNESS PARAMETER TYPE: RA; RZ; RT; RQ ; STYLUS TIP RADIUS: 196.8503 ; ANALYSIS GRAPH: NO ; RA MEASUREMENT MINIMUM: 19.6850 ; RA MEASUREMENT MAXIMUM (MICRO INCH): ...
    $1.640,00 Tan poco como $984,00
    $984,00
    PHASE II 250-444

    PHASE II

    250-444

    14 TO 20 INCH LATHE SWING, WEDGE TYPE QUICK CHANGE TOOL POST 6-1/4 INCH TOOL POST HEIGHT, SERIES 400, 7 INCH OVERALL HEIGHT
    $1.557,00 Tan poco como $935,00
    $935,00
    PHASE II 221-310

    PHASE II

    221-310

    10" TABLE DIAM, HORIZONTAL & VERTICAL ROTARY MACHINING TABLE 6-3/4" CENTERLINE HEIGHT, 3MT CENTER TAPER, 0.465" T-SLOT WIDTH (MOQ=1, PKG QTY=1)
    $1.399,00 Tan poco como $840,00
    $840,00
    PHASE II UTG-2900

    PHASE II

    UTG-2900

    0.025" TO 23" PULSE ECHO MODE & 2-23/64" ECHO-ECHO MODE MEASUREMENT, 0.01MM RESOLUTION ELECTRONIC THICKNESS GAGE ACCURATE UP TO 0.015MM (MOQ=1, PKG QTY=1)
    $1.314,00 Tan poco como $789,00
    $789,00
    PHASE II 235-6299

    PHASE II

    235-6299

    5C COMPATIBLE, HORIZONTAL & VERTICAL COLLET INDEXER 1" MAX COLLET CAPACITY (MOQ=1, PKG QTY=1)
    $1.301,00 Tan poco como $781,00
    $781,00
    PHASE II 221-308

    PHASE II

    221-308

    8" TABLE DIAM, HORIZONTAL & VERTICAL ROTARY MACHINING TABLE 5.985" CENTERLINE HEIGHT, 3MT CENTER TAPER, 0.465" T-SLOT WIDTH (MOQ=1, PKG QTY=1)
    $1.199,00 Tan poco como $720,00
    $720,00
    PHASE II 250-555

    PHASE II

    250-555

    17 TO 48 INCH LATHE SWING, WEDGE TYPE QUICK CHANGE TOOL POST 7-3/8 INCH TOOL POST HEIGHT, SERIES 500, 8-3/8 INCH OVERALL HEIGHT (MOQ=1, PKG QTY=1)
    $1.137,00 Tan poco como $683,00
    $683,00
    PHASE II 220-010

    PHASE II

    220-010

    10" TABLE DIAM, HORIZONTAL ROTARY MACHINING TABLE 6-3/4" CENTERLINE HEIGHT, 3MT CENTER TAPER, 0.465" T-SLOT WIDTH (MOQ=1, PKG QTY=1)
    $1.120,00 Tan poco como $672,00
    $672,00
    PHASE II 221-306

    PHASE II

    221-306

    6" TABLE DIAM, HORIZONTAL & VERTICAL ROTARY MACHINING TABLE 4.92" CENTERLINE HEIGHT, 1/2" BORE DIAM, 2MT CENTER TAPER, 0.39" T-SLOT WIDTH, 90:1 GEAR RATIO (MOQ=1, PKG QTY=1)
    $1.120,00 Tan poco como $672,00
    $672,00
    PHASE II AX-VSN1282E3300

    PHASE II

    AX-VSN1282E3300

    MOTOR CONTROL UNIT
    $1.039,00 Tan poco como $624,00
    $624,00
    Repare los suyos $520,00
    PHASE II 240-002

    PHASE II

    240-002

    12" TABLE COMPATIBILITY, 7.1 TO 9" CENTER HEIGHT, TAILSTOCK FOR USE WITH ROTARY TABLE
    $1.026,00 Tan poco como $616,00
    $616,00
    PHASE II 220-008

    PHASE II

    220-008

    8" TABLE DIAM, HORIZONTAL ROTARY MACHINING TABLE 3MT CENTER TAPER, 0.465" T-SLOT WIDTH (MOQ=1, PKG QTY=1)
    $922,00 Tan poco como $554,00
    $554,00
    PHASE II 221-304

    PHASE II

    221-304

    4" TABLE DIAM, HORIZONTAL & VERTICAL ROTARY MACHINING TABLE 2.76" CENTERLINE HEIGHT, 2.76" BORE DIAM, 2MT CENTER TAPER, 0.236" T-SLOT WIDTH (MOQ=1, PKG QTY=1)
    $902,00 Tan poco como $542,00
    $542,00
    PHASE II 240-001

    PHASE II

    240-001

    8 & 10" TABLE COMPATIBILITY, 5.6 TO 7.2" CENTER HEIGHT, TAILSTOCK FOR USE WITH ROTARY TABLE
    $895,00 Tan poco como $537,00
    $537,00
    PHASE II 250-222

    PHASE II

    250-222

    10 TO 15 INCH LATHE SWING, WEDGE TYPE QUICK CHANGE TOOL POST 4-5/8 INCH TOOL POST HEIGHT, SERIES 200, 5-9/16 INCH OVERALL HEIGHT
    $889,00 Tan poco como $534,00
    $534,00
    PHASE II PTG-4000

    PHASE II

    PTG-4000

    COATING THICKNESS GAGES; MAXIMUM THICKNESS MEASUREMENT (MIL): 50.00; MINIMUM THICKNESS MEASUREMENT (MIL): 0.10; FOR USE WITH: NON-FERROUS BASE; FERROUS BASE; DISPLAY TYPE: COLOR LCD; ACCURAC ...
    $785,00 Tan poco como $471,00
    $471,00
    PHASE II 260-512

    PHASE II

    260-512

    5-1/2" TABLE WIDTH X 12 TABLE LENGTH, 5" CROSS TRAVEL X 8" LONGITUDINAL TRAVEL, SLIDE MACHINING TABLE 4-1/2" OVERALL HEIGHT, 9" BASE LENGTH X 8" BASE WIDTH
    $778,00 Tan poco como $467,00
    $467,00
    PHASE II 250-333

    PHASE II

    250-333

    13 TO 18 INCH LATHE SWING, WEDGE TYPE QUICK CHANGE TOOL POST 5-1/8 INCH TOOL POST HEIGHT, SERIES 300, 6-1/8 INCH OVERALL HEIGHT (MOQ=1, PKG QTY=1)
    $757,00 Tan poco como $455,00
    $455,00
    PHASE II 241-101

    PHASE II

    241-101

    6, 8, 10 & 12" TABLE COMPATIBILITY, DIVIDING PLATE
    $724,00 Tan poco como $435,00
    $435,00
    PHASE II AFG-0600

    PHASE II

    AFG-0600

    MECHANICAL TENSION & COMPRESSION FORCE GAGES; CAPACITY (LBF): 100.00 ; CAPACITY (KGF): 45.36 ; ACCURACY: 1.0000% ; RESOLUTION (LBF): 0.5000 ; MEASURES: COMPRESSION; TENSION ; ACCURACY (%): 1 ...
    $652,00 Tan poco como $392,00
    $392,00
    PHASE II 250-400

    PHASE II

    250-400

    14 TO 20 INCH LATHE SWING, PISTON TYPE QUICK CHANGE TOOL POST 6-1/4 INCH TOOL POST HEIGHT, SERIES 400, 7 INCH OVERALL HEIGHT (MOQ=1, PKG QTY=1)
    $648,00 Tan poco como $389,00
    $389,00
    PHASE II 250-100

    PHASE II

    250-100

    9 TO 12 INCH LATHE SWING, PISTON TYPE QUICK CHANGE TOOL POST 3-7/8 INCH TOOL POST HEIGHT, SERIES 100, 4-11/16 INCH OVERALL HEIGHT
    $553,00 Tan poco como $332,00
    $332,00
    PHASE II 559-115

    PHASE II

    559-115

    MANUAL LATHE CHUCK: 10" DIA, 3 JAWS, SELF-CENTERING TWO-PIECE JAWS, PLAIN BACK MOUNT (MOQ=1, PKG QTY=1)
    $547,00 Tan poco como $329,00
    $329,00
    PHASE II PHT1800-100

    PHASE II

    PHT1800-100

    HARDNESS TESTER ACCESSORIES; SCALE TYPE: LEEB D ; OVERALL HEIGHT: .810 ; OVERALL LENGTH: 5.82 ; OVERALL DIAMETER: .810 ; NUMBER OF PIECES: 1 ; UNSPSC CODE: 41114600 (MOQ=1, PKG QTY=1)
    $508,00 Tan poco como $305,00
    $305,00
    PHASE II 225-204

    PHASE II

    225-204

    5C COMPATIBLE, 36 INCREMENT, HORIZONTAL SPIN COLLET INDEXER 1-1/8" MAX COLLET CAPACITY, MANUAL OPERATION
    $489,00 Tan poco como $294,00
    $294,00
    PHASE II 900330-9410

    PHASE II

    900330-9410

    HARDNESS CALIBRATION TEST BLOCKS; BLOCK TYPE: TEST BLOCK KIT ; SCALE TYPE: ROCKWELL C ; MINIMUM HARDNESS: 20HRC ; MAXIMUM HARDNESS: 67HRC ; HARDNESS RANGE DESCRIPTION: HIGH ; OVERALL HEIGHT: ...
    $477,00 Tan poco como $287,00
    $287,00
    PHASE II 250-111

    PHASE II

    250-111

    9 TO 12 INCH LATHE SWING, WEDGE TYPE QUICK CHANGE TOOL POST 3-7/8 INCH TOOL POST HEIGHT, SERIES 100, 4-11/16 INCH OVERALL HEIGHT (MOQ=1, PKG QTY=1)
    $434,00 Tan poco como $261,00
    $261,00
    PHASE II 250-300

    PHASE II

    250-300

    13 TO 18 INCH LATHE SWING, PISTON TYPE QUICK CHANGE TOOL POST 5-1/8 INCH TOOL POST HEIGHT, SERIES 300, 6-1/8 INCH OVERALL HEIGHT (MOQ=1, PKG QTY=1)
    $427,00 Tan poco como $257,00
    $257,00
    PHASE II 250-075

    PHASE II

    250-075

    5 TO 8 INCH LATHE SWING, WEDGE TYPE QUICK CHANGE TOOL POST SERIES 250, 9/32 TO 23/32 INCH CENTERLINE HEIGHT RANGE (MOQ=1, PKG QTY=1)
    $382,00 Tan poco como $230,00
    $230,00
    PHASE II 240-003

    PHASE II

    240-003

    3.5000 TO 4.0000" CENTERLINE HEIGHT, TAILSTOCK ADJUSTABLE, 5C COMPATIBLE COLLET SERIES, USE WITH COLLET INDEX FIXTURES (MOQ=1, PKG QTY=1)
    $365,00 Tan poco como $219,00
    $219,00
    PHASE II 240-005

    PHASE II

    240-005

    6" TABLE COMPATIBILITY, 3.94 TO 5.516" CENTER HEIGHT, TAILSTOCK FOR USE WITH ROTARY TABLE (MOQ=1, PKG QTY=1)
    $324,00 Tan poco como $195,00
    $195,00
    PHASE II 250-200

    PHASE II

    250-200

    10 TO 15 INCH LATHE SWING, PISTON TYPE QUICK CHANGE TOOL POST 4-5/8 INCH TOOL POST HEIGHT, SERIES 200, 5-9/16 INCH OVERALL HEIGHT (MOQ=1, PKG QTY=1)
    $322,00 Tan poco como $194,00
    $194,00
    PHASE II 221-360

    PHASE II

    221-360

    10" TABLE COMPATIBILITY, 8" CHUCK DIAM, CHUCK ADAPTER PLATE FOR USE WITH PHASE II ROTARY TABLE (MOQ=1, PKG QTY=1)
    $254,00 Tan poco como $153,00
    $153,00
    PHASE II 221-358

    PHASE II

    221-358

    8" TABLE COMPATIBILITY, 6" CHUCK DIAM, CHUCK ADAPTER PLATE FOR USE WITH PHASE II ROTARY TABLE (MOQ=1, PKG QTY=1)
    $235,00 Tan poco como $141,00
    $141,00
    PHASE II PHT950-25

    PHASE II

    PHT950-25

    30 HA TO 90 HA HARDNESS, SHORE A SCALE, HARDNESS CALIBRATION TEST BLOCK KIT 5-1/2 INCH LONG, 4-1/2 INCH WIDE, 2-1/2 INCH HIGH, 7 PIECE (MOQ=1, PKG QTY=1)
    $223,00 Tan poco como $134,00
    $134,00
    PHASE II 221-356

    PHASE II

    221-356

    6" TABLE COMPATIBILITY, 5" CHUCK DIAM, CHUCK ADAPTER PLATE FOR USE WITH PHASE II ROTARY TABLE (MOQ=1, PKG QTY=1)
    $195,00 Tan poco como $117,00
    $117,00
    PHASE II 250-202

    PHASE II

    250-202

    SERIES BXA, #2 BORING, TURNING & FACING TOOL POST HOLDER 10 TO 15" LATHE SWING, 1-3/4" OAH, 5/8" MAX TOOL CUTTING SIZE, 1-1/8" CENTERLINE HEIGHT
    $172,00 Tan poco como $104,00
    $104,00
    PHASE II 250-065

    PHASE II

    250-065

    5 TO 8 INCH LATHE SWING, PISTON TYPE QUICK CHANGE TOOL POST SERIES 250, 5/8 TO 1-1/8 INCH CENTERLINE HEIGHT RANGE, 1-1/2 INCH OVERALL HEIGHT (MOQ=1, PKG QTY=1)
    $124,00 Tan poco como $75,00
    $75,00
    PHASE II 340-005

    PHASE II

    340-005

    DIGITAL COUNTER 5-DIGIT
    $112,00 Tan poco como $67,00
    $67,00
    Repare los suyos $200,00
    PHASE II 222-775

    PHASE II

    222-775

    R8 SHANK, JT6 MOUNT TAPER, DRILL CHUCK ARBOR JACOBS TAPER MOUNT
    $89,00 Tan poco como $54,00
    $54,00
    PHASE II 222-723

    PHASE II

    222-723

    ARBOR FOR DRILL CHUCK, 3/4 INCH SHANK DIAMETER, JT4 MOUNT TAPER
    ✓ ¡EN STOCK!
    $26,10 Tan poco como $15,66
    $15,66
    PHASE II 350-105

    PHASE II

    350-105

    BORING HEAD SHANK R8 BRIDGEPORT 5INCH
    ✓ ¡EN STOCK!
    $23,40 Tan poco como $13,77 $6,89
    $13,77 $6,89
    PHASE II AX4

    PHASE II

    AX4

    DISCONTINUED BY MANUFACTURER, PHASE MOTION CONTROL, SERIES BRUSHLESS, MOTOR CONTROLLERS
    ✓ ¡EN STOCK!
    Tan poco como $891,00
    $891,00
    Repare los suyos $840,00
    PHASE II 201165

    PHASE II

    201165

    STEPPER MOTOR DRIVER
    Tan poco como $294,00
    $294,00
    Repare los suyos $250,00
    1